Lutz Mueller
3f5bb55708
2002-04-22 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c (post_func): Only put the camera back to 9600 bps if
this is needed. And don't reset the camera before the speed change.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4466 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-22 07:50:03 +00:00
Matt Martin
5cf03379c9
library.c In post_func: Bring serial port speed back down immediately
...
after resetting the camera (kills the high speed at least on the DS7).
Note that this doesn't seem to be a problem immediately following the
speed change command. Needs to be tested on all cams in light of
Lutz's earlier comment that the speed isn't getting reset !
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4465 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-22 05:15:38 +00:00
Matt Martin
77ae1550e7
fuji.c Remove 0xff escaping code now done by libgphoto2_port
...
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4464 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-22 03:33:32 +00:00
Lutz Mueller
59effda77f
2002-04-21 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.c: Formatting.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4461 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-21 22:01:45 +00:00
Lutz Mueller
03a3df7e11
2002-04-21 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c:
* fuji.[c,h]: Implement upload and summary.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4460 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-21 21:51:16 +00:00
Lutz Mueller
06f81773ba
2002-04-21 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c: A fuji_reset doesn't seem to reset the speed to 9600.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4459 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-21 20:25:32 +00:00
Lutz Mueller
3026df7631
2002-04-19 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c: Don't make the check for supported commands fatal.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4454 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-19 08:28:38 +00:00
Lutz Mueller
8e55fef6db
2002-04-19 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c: If we tell the camera to switch to another speed, we
need to change the port's speed, too.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4453 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-19 07:24:06 +00:00
Lutz Mueller
1213f7d804
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c
* fuji.[c,h]: Basic configuration support. Progress information.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4450 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 22:41:00 +00:00
Lutz Mueller
08629ccf4f
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* PROTOCOL: Some notes.
* fuji.c: Fix calculation of packet length.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4448 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 15:08:39 +00:00
Lutz Mueller
443010fb15
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c:
* fuji.[c,h]: Use the [pre,post]_func-tions.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4447 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 14:38:55 +00:00
Lutz Mueller
8a28423cf0
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c:
* fuji.[c,h]: Check for supported commands.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4446 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 13:55:00 +00:00
Lutz Mueller
b90d6ec80b
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.c: Fix calculation of checksum.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4445 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 13:21:51 +00:00
Lutz Mueller
17f2af4e43
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.c: For now, don't check the checksum.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4444 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 12:51:45 +00:00
Lutz Mueller
c589f5f466
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.c: Fix calculation of packet length.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4443 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 12:18:46 +00:00
Lutz Mueller
1eb9fe3e94
2002-04-18 Lutz M�ller <lutz@users.sourceforge.net>
...
* library.c:
* fuji.[c,h]: Implement fetching of previews.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4442 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-18 06:54:59 +00:00
Lutz Mueller
dc27c8c496
2002-04-17 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.c: Fix logic.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4437 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-17 20:42:21 +00:00
Lutz Mueller
d7b0fdf4ef
2002-04-17 Lutz M�ller <lutz@users.sourceforge.net>
...
* fuji.[c,h]:
* library.c: More functions. Needs testing.
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4436 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-17 20:09:47 +00:00
Lutz Mueller
c073dca522
New file.
...
git-svn-id: https://svn.code.sf.net/p/gphoto/code/trunk/libgphoto2@4426 67ed7778-7388-44ab-90cf-0a291f65f57c
2002-04-16 14:43:34 +00:00